LED TV and Operating Buttons

FRONT and REAR VIEW

Control buttons VIEW

Control Buttons

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection switch

Note:You can move the switch, upward or downward to change the volume. If you want to change channels, press the middle of the switch once (Position 3) and then move upward or downward. If you press the middle of the switch once more, source OSD will be displayed. If you press the middle of the switch and hold about a few seconds, the TV will switch to standby mode. Main menu OSD cannot be displayed via control buttons.

Viewing the Back side Connections

2

1

IDM H

HDMI

SPDIF

 

Coax.OUT

 

1.HDMI 2: HDMI Input

2.HDMI 1: HDMI Input

HDMI Inputs are for connecting a device that has an HDMI socket. Your LED TV is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI connection.

3.RF Input connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

4.SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.

English - 7 -

For assistance, please call our Tesco Electrical Helpline on 0845 456 6767

01_MB62_[GB]_woypbpr_3902UK_IDTV_NICKEL17_22910LED_10075095_

50198877.indd 7

13.09.2011 14:16:52

 

 

 

Page 8
Image 8
Technika 22-880 LED TV and Operating Buttons, Viewing the Back side Connections, Front and Rear View Control buttons View