Connecting to a DVD Player via
HDMI
Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.
Note: Not all cables shown in the illustration are supplied.
•If your DVD player has an HDMI socket, you can connect via HDMI for better video and audio quality.
•When the connection is made, switch to YPbPr source. See, Input selection section.
•You may also connect through the SCART input.
2DMI H | HDMI1 |
SPDIF |
|
Coax.OUT |
|
2IDM H | HDMI1 |
SPDIF |
|
Coax.OUT |
|
HDMI Cable 
(not supplied)
Scart Cable (not supplied)
External device
•When you connect to DVD player as illustrated above, switch to the connected HDMI source. See, Input Selection section for more information on changing sources.
Connecting to a DVD Player
•Some DVD players are connected through COMPONENT SOCKETS (YPbPr). YPbPr can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable (YPbPr cable is not supplied).
•When the connection is made, switch to YPbPr source. See, “Input selection” section.
•To enable audio connection, use the VGA/ Component Audio cable. First, plug single jack of the cable to the TV. Afterwards, insert your DVD player’s audio cable’s connectors into the plural part of the VGA/Component audio connection cable (see illustration below). Colours of the connected jacks should match ( RED & WHITE)
Audio Connection
To RED & WHITE inputs
AV |
|
|
Side |
|
|
Side AV Input | Audio Cable | DVD Player |
Side AV | ||
Connection cable | (Not supplied) |
|
(supplied) |
|
|
Video Connection
YPbPr to PC 
Scart socket cable (optional) HDMI inputs
DVD Player
•Note: These three methods of connection perform the same function but in different levels of quality. It is not necessary to connect by all three methods.
Remote Control Handset
Inserting Batteries
•Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part.
•Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity
+ | - | + |
- |
|
|
Note: Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Remote range is approximately 7m/23ft.
English - 10 -
For assistance, please call our Tesco Electrical Helpline on 0845 456 6767
01_MB62_[GB]_woypbpr_3902UK_IDTV_NICKEL17_22910LED_10075095_ | 50198877.indd 10 | 13.09.2011 14:16:54 |
|
|
|
