Technika LCD46-920 manual Headphone, Sound Mode optional, Spdif Out, SRS TruSurr XT optional

Headphone

Press “” or “” button to select Headphone. Press “” button to view the headphone menu.

Headphone sub-menu options are described below:

Volume

Press “” or “” button to select Volume. Press “

”button to increase headphone volume level. Press “” button to decrease headphone volume level. Headphone volume level can be adjusted between 0 and 63.

Headphone Sound (optional)

Press “” or “” button to select Headphone Sound. Using “” or “” button, you can select Main, PIP/PAP, Active or Inactive.

Main : Main window sound.

PIP/PAP : PIP/PAP window sound.

Active : Sound of the current selection.

Inactive : Sound of the currently inactive window.

Sound Mode (optional)

Press “” or “” button to select Sound Mode. Using “” or “” button, you can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel supports that mode.

AVL

Automatic Volume Limiting (AVL) function adjusts the sound to obtain fixed output level between programmes (For instance, volume level of advertisements tend to be louder than programmes).

Press “” or “” button to select AVL. Press “” or “” button to set the AVL as On or Off.

Spdif Out

Press “” or “” button to select Spdif Out. Press “

” or “” button to set the Spdif Out. as On or Off.

Note: If Spdif Out is set to On, headphone will be disabled.

SRS TruSurr XT (optional)

By pressing “” or “” select SRS TruSurr XT. Press “” or “” button to set SRS TruSurr XT as on or off.

Note: If you set SRS TruSurr XT as On, some features in the Sound menu can be unavailable to be set.

Store

Press “” or “” button to select Store. Press “ ” or OK button to store the settings. “Stored...” will

be displayed on the screen.

Feature Menu

Pip-Pap

In the Feature menu, highlight PIP item by pressing “” or “” buttons. Press “” button to enter PIP submenu:

Using “” or “” button, you can switch to PIP, PAP mode or turn off the feature.

If the TV is switched to PIP or PAP mode, Pip-Pap submenu will change accordingly and the following settings will appear on the same menu screen.

Note that if you switch to PAP mode by using Pip-Pap setting, only Source and Swap options will be active among the menu settings.

Pip-Pap

This line controls Pip/Pap modes. Use “” or “” buttons to switch the TV to Pip, Pap or Off.

Pip Size

Using this setting, you can set the size of the Pip window. Press “” or “” button to highlight Pip Size item. Use “” or “” button to set Pip Size to Small or Large.

English - 24 -

[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 24 16.10.2009 10:21:47