TechniSat DigiCorder S1 manual Country setting, Antenna configuration, DiSEqC, Position A/Option a

(Fig. 5-3)

(Fig. 5-4)

(Fig. 5-5)

(Fig. 5-6)

(Fig. 5-7)

audio language. (Fig. 5-3)

When the installation assistant has been completed, the programmes in the Favourites list will be sorted accordingly.

>Confirm by pressing OK, to accept this selection into memory.

Country setting

>Use the up/down arrow keys to select the time zone corresponding to your location. (Fig. 5-4)

The automatic clock setting will be made in accordan- ce with your selection.

>Confirm by pressing OK, to accept the setting into memory, and to move on to the antenna configuration.

Antenna configuration

This step of the installation procedure serves to adjust the setting of your digital receiver to the configuration of your antenna.

>If you wish to accept the standard antenna setting, use the up/down arrow keys to mark the entry Standard and confirm by pressing OK. (Fig. 5-5) In this case you can proceed to the Point “Software Updates”.

>If the configuration of your reception installation does not correspond to the standard setting, mark the entry Manual and confirm by pressing OK.

DiSEqC

>If your reception installation is equipped with DiSEqC

components, mark the field Activate and confirm by pressing OK (Fig. 5-6).

(Additional information on DiSEqC can be found in Chapter10, Technical Terms.)

Position A/Option A

>Use the arrow up/down keys to mark the satellite you wish to receive at the DiSEqC setting Position A/Option A, and confirm by pressing OK. (Fig. 5-7)

Position B/Option A

>Use the arrow up/down keys to mark the satellite you wish to receive at the DiSEqC setting Position B/Option A, and confirm by pressing OK. (Fig. 5-8)

Position A/Option B

>Use the arrow up/down keys to mark the satellite you wish to receive at the DiSEqC setting Position A/Option B, and confirm by pressing OK. (Fig. 5-9)

14