TechniSat DigiCorder S1 manual Position B/Option B, Updating software, Scanning for programmes

Position B/Option B

>Use the arrow up/down keys to mark the satellite you wish to receive at the DiSEqC setting Position

B/Option B, and confirm by pressing OK. (Fig. 5-10) As your next step, check again on the configuration of your antenna.

>If you wish to accept this setting, use the arrow up/down keys to mark the field Yes, and confirm by pressing OK. (Fig. 5-11)

Updating software

When you have confirmed the antenna settings, the digital receiver will automatically check whether a more up-to-date version of the software for your unit is available via satellite. If a new version of the software is available, you can perform an automatic software update.

>Use the right/left arrow keys to select the field Update, and confirm by pressing OK. (Fig. 5-12) The new software for your unit will now be downloaded. This procedure may take several minutes.

Scanning for programmes

Once you have checked on the software version, and possi- bly downloaded an updated version, you can proceed to searching for programmes.

>Use the up/down arrow keys to mark the field All Channels, if you wish to scan for both encrypted and free-to-air programmes, or select All Free-to-airChannels if you wish to scan for only this type of pro- gramme. (Fig. 5-13)

>Confirm your selection by pressing OK, the unit will perform an automatic programme search. All the satel- lites selected during the antenna configuration prove- dure will be scanned for programmes. This procedure may take several minutes. Please note any messages displayed on screen.

(Fig. 5-8)

(Fig. 5-9)

(Fig. 5-10)

(Fig. 5-11)

(Fig. 5-12)

15