TechniSat® VC 2002 S
PROGRAMMING
Watching a scrambled Videocrypt programme
1.Select a coded channel (eg. Movie Channel or Sky Movies Plus).
2.Insert the viewing card as indicated by the arrow.
3.After a few seconds the descrambled picture will appear on the screen.
NOTE: Do not bend or damage the card in any way.
SCREEN MESSAGES:
“Please insert card” - make sure that the card is inserted correctly.
“Please wait” - descrambled picture should appear in a few seconds.
“Your card is invalid” - ensure the card is ins- erted correctly and/or has not been damaged. “Your card has expired” - a replacement card is required.
“Channel blocked” - indicates there is some- thing wrong with your card.
In the case of the last 3 messages, first of all try turning the receiver off, disconnect from the mains and leave for one minute. Turn on again and retry card. If this still fails contact BSkyB.
CONNECTING A SEPARATE DECODER: (*)
To choose between normal and decoder mode press DECODER:
In position “n” the reception signal will be connec- ted directly from the TV or video recorder.
In position “d” the coded signal
Press the D MODE button to select the deco- der signal according to the following table:
D1: Flat, MAC compatible signal
D2: PAL
D3: Unclamped video signal
D4: Clamped video signal
Be sure to consider the recommendation of the manufacturer regarding the connection of the decoder.
(*)DOES NOT APPLY TO VIDEOCRYPT INTER- NAL DECODER, BUT REFERS TO THE USE OF A SEPARATE DECODER FOR NON- VIDEOCRYPT CODED CHANNELS.
FREQUENCY SHIFT:
If the LNB of the outdoor unit does not supply the exact
1.Press the “V/H” button for about 3 seconds.
2.The receiver displays “AFC”.
3.Enter “999”.
4.The receiver displays “0.0”.
5.Now it can be tuned up or down (+/- 5 MHz) with the tuning buttons.
6.Once you have achieved the best picture quality you can store the frequency shift with the STORE button.
NOTE: The frequency shift applies for all channels.
8
