VII. Removal and Installation-Type “E” Air Cleaner

1.Turn cover clockwise to remove. See Figure 52.

2.Remove paper filter from flange. See "II. Servicing Paper Filters" instructions on page 19. Afterward, continue reading instructions below.

3.Discard paper filter.

4.Clean cover and flange thoroughly.

5.Insert new paper filter into cover.

6.Line up tabs on cover with slots on flange.

7.Push cover firmly against flange and turn counterclock- wise until cover locks securely in place.

8.Secure cover and be sure it is in vertical position.

E. Carburetor

If you think your carburetor needs adjusting, see your nearest Authorized TecumsehPower Servicing Dealer. Engine performance should not be affected at altitudes up to 7,000 feet (2,134 meters). For operation at higher elevations, contact an Authorized TecumsehPower Servicing Dealer.

F.Engine Speed

 

 

To avoid serious injury or death,

WARNING

 

 

 

DO NOT modify engine in any way.

 

 

 

 

Tampering with the governor setting can lead to a runaway engine and cause it to operate at unsafe speeds. NEVER tamper with factory setting of engine governor.

Running the engine faster than the speed set at the factory can be dangerous and will VOID THE ENGINE WARRANTY.

G. Engine Stopping Mechanism

 

 

 

Some engines are equipped with a

 

 

WARNING

 

 

 

 

 

federally-mandated mechanism which

 

 

 

 

 

stops the engine and mower blade. To avoid serious injury or death as a result of contact with the mower blade, DO NOT interfere with or bypass this mechanism. Parts of the mechanism may be subject to wear and must be checked once a year by an Authorized TecumsehPower Servicing Dealer. In the event the mechanism fails for any reason, you must NOT use the engine until corrected by an Authorized TecumsehPower Servicing Dealer.

H. Adjustments

DO NOT make any engine adjustments. Factory settings are satisfactory for most conditions. If adjustments are needed, contact your Authorized TecumsehPower Servicing Dealer.

 

2

 

4

 

3

 

1

 

5

1.

Paper Filter

2.

Slots

3.

Flange

4.

Tabs

5.

Cover

Figure 52. Air Cleaner Type “E” Assembly

VIII. Transporting Your Engine

 

 

 

NEVER transport this engine inside

 

 

WARNING

 

 

 

 

 

another vehicle or in any enclosed

 

 

 

 

 

space if there is any gasoline in the tank. Fuel vapor or spilled fuel may ignite leading to serious injury or death.

 

 

 

If there is fuel in the fuel tank, close

 

 

WARNING

 

 

 

 

 

the fuel shut-off valve, if equipped,

 

 

 

 

 

and transport the engine upright in an open vehicle, such as an open trailer or open bed of a pickup truck.

If you DO NOT have an open vehicle and have to transport the engine upright in a closed vehicle, follow these steps for emptying the fuel tank before transporting:

1.Empty fuel tank by using a commercially available suction device designed for use with gasoline.

WARNING

To avoid serious injury or death, DO

fuel by mouth.

NOT pour fuel from engine or siphon

 

2.Drain fuel into an approved red GASOLINE container, being careful to avoid spilling.

3.Run the engine until remaining fuel is consumed.

 

 

 

NEVER leave the engine unattended

 

 

WARNING

 

 

 

 

 

when it is running and NEVER run

 

 

 

 

 

engine in enclosed areas to avoid death or serious injury.

181-1215-14

Four-Cycle Engine • Vertical Crankshaft • Air-Cooled

Page 21

Page 22 Page 24
Page 23
Image 23
Tecumseh LV195XA, LV195EA VIII. Transporting Your Engine, Carburetor, Engine Speed, Engine Stopping Mechanism, Adjustments
Page 22 Page 24

LV195EA, LV156EA, LV156XA, LV195XA specifications

Tecumseh is a well-known player in the field of small engines, and their LV series, including the LV156EA, LV156XA, LV195EA, and LV195XA, showcases their commitment to innovation and reliability. Designed for various applications, these engines are favored in lawn care equipment, utility vehicles, and more.

The LV156EA and LV156XA models feature a robust design, emphasizing durability and ease of use. They are powered by a 4-cycle, single-cylinder layout, which balances power and efficiency. Equipped with an electronic ignition system, these engines ensure quick starts and reliable operation in diverse conditions. The LV156 series typically has a displacement of approximately 156cc, which delivers a commendable power output suitable for light to medium-duty tasks.

On the other hand, the LV195XA and LV195EA models elevate the performance bar with a larger displacement of around 195cc. This additional capacity translates to higher torque and increased power output, making them ideal for more demanding operations. Both models also feature a heavy-duty crankshaft and a cast-iron cylinder liner, ensuring prolonged engine life and superior wear resistance.

A standout feature across the LV series is Tecumseh’s commitment to low emissions and fuel efficiency. The engines integrate advanced combustion technology, optimizing fuel mix for cleaner combustion. This is particularly beneficial for commercial users, as reduced emissions can help meet stringent environmental regulations.

Moreover, Tecumseh's LV series incorporates user-friendly design elements such as an integrated recoil starter and easy-access oil fill, streamlining maintenance tasks. The lightweight construction aids in portability while providing stability during operation.

Overall, the LV156EA, LV156XA, LV195EA, and LV195XA engines from Tecumseh exemplify a blend of innovative technology, robust performance, and environmental responsibility, making them reliable choices for various applications in the small engine market. Whether for residential, commercial, or industrial use, these engines showcase Tecumseh's dedication to quality and performance in the small engine segment.
Top Page Image Contents