8.Clean area around oil fill tube and oil fill cap/dipstick. See Figure 34.
9.Place engine back onto a level upright position with the wheels touching the ground.
10.Fill with recommended oil. See Table 1 and "III. Oil and Fuel Specifications" instructions on page 4. Afterward, continue reading instructions below.
NOTES
DO NOT overfill oil filler. Doing so may result in oil
DO NOT allow oil level to fall below the “ADD” mark on dipstick. Doing so may result in equipment malfunction or damage.
Contact your Authorized TecumsehPower Servicing Dealer for TecumsehPower Oil.
11.Wipe away any spilled oil.
12.Install oil fill cap/dipstick. Tighten securely. See Figure 34.
Figure 34. Oil Fill Cap/Dipstick
Figure 35. Disconnecting/Connecting Spark Plug
1 | 2 |
1.Grounding Post Connection
2.Spark Plug Connection
Figure 36. Typical Grounding Post/Spark Plug Connection
13.Carefully disconnect spark plug wire from grounding post, if provided. See Figures 35 thru 37.
14.Connect spark plug wire to spark plug before attempt- ing to start engine.
NOTES |
|
The oil filter if so equipped, should be changed every 100 |
|
operating hours or at least once a year. | Figure 37. Typical Spark Plug Connection |
|
The filter should be changed more often if the engine is operated in extremely dusty or dirty conditions.
Contact your Authorized TecumsehPower Servicing Dealer for a genuine replacement Oil Filter.
Page 15 |