B. Filling Oil Sump
I.Oil Fill Cap/Dipstick
If your engine has an oil fill cap/dipstick go to step 1. If your engine does NOT have an oil fill cap/dipstick, see "II. Oil Fill Cap/Plug" instructions.
1.Be sure engine is upright and level.
2.Unscrew oil fill cap/dipstick from oil filler tube and wipe dipstick clean. See Figures 7 and 8.
3.Screw oil fill cap/dipstick back into oil filler tube. Tighten securely.
4.Unscrew and remove oil fill cap/dipstick from oil filler tube. Note oil level. If oil reading on dipstick is below “ADD” mark, slowly add oil to reach “FULL” level. See Figure 6 on page 4. Afterward, continue reading instructions below.
5.Screw oil fill cap/dipstick back into oil filler tube. Tighten securely.
6.Wipe away any spilled oil.
NOTE
To change oil for engines with an oil fill cap/dipstick, see "I. Oil Fill Cap/Dipstick" instructions on page 14.
II. Oil Fill Cap/Plug
If your engine does NOT have an oil fill cap/dipstick go to step 1. If your engine has an oil fill cap/dipstick, see "I. Oil Fill Cap/Dipstick" instructions above.
1.Be sure engine is upright and level.
2.Clean area around oil fill cap/plug. See Figure 9.
3.Unscrew oil fill cap/plug.
4.Add oil to overflow point, making sure to avoid spilling.
5.Screw oil fill cap/plug back into oil fill hole. Tighten securely.
6.Wipe away any spilled oil.
NOTE
To change oil for engines without a dipstick, see "II. Oil Fill Cap/Plug" instructions on page 16.
| 3 | 4 |
| 5 |
2 |
|
|
|
|
|
|
| 7 | 6 |
| 1 | 9 | 8 |
|
1. | Spark Plug Cap |
|
|
|
2. | Spark Plug Wire |
|
|
|
3. | Oil Fill Cap/Dipstick |
|
| |
4. | Starter Cord Handle |
|
| |
5. | Fuel Fill Cap |
|
|
|
6. | Air Cleaner |
|
|
|
7. | Primer Bulb |
|
|
|
8. | Carburetor |
|
|
|
9. | Muffler |
|
|
|
Figure 7. Engine With Oil Fill Cap/Dipstick
Figure 8. Oil Fill Cap/Dipstick
Figure 9. Engine With Oil Fill Cap/Plug
Page 5 |
