Tefal FS2820E0, FS4035M0 manual For your safety, Description

9100012806_01_FS28XX_110x154 13/12/12 10:19 Page4

For your safety

This appliance complies with the technical rules and standards for safety currently in force (Electromagnetic Compatibility, Low Voltage, Environnement).

•Please read these instructions carefully and keep them for future reference.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children must be supervised to ensure that they do not play with the appliance.

•Warning ! The voltage of your electrical installation must correspond to that of the iron (220V-240V). Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee.

•This iron must always be plugged into an earthed socket. If using a mains extension lead, ensure that it is correctly rated (10 A), with an earth connection.

•If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service Centre to avoid any danger.

•The appliance should not be used if it has fallen, if it has obvious damage or has functional anomalies. Never dismantle your appliance : have it inspected by an Approved Service Centre, so as to avoid any danger.

•Never immerse your iron in water !

•Do not unplug your appliance by pulling on the cord. Always unplug your appliance: before cleaning it, after each use.

•Never leave the appliance unattended when it is connected to a power source or if it has not cooled down for approximately 1 hour.

•The soleplate of your iron may reach high temperatures. Do not touch the metal parts of the appliance during use as they may become very hot. Take care especially when you are ironing close to the edge or on a corner of your ironing board. Do not iron clothes that are directly on your body.

•Your iron should be used and placed on a flat, stable, heat-resistant surface. When you put your iron onto its iron rest, make sure that the surface on which you put it is stable.

•This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.

Description

1.Thermostat indicator light

2.Temperature setting indicator

3.Power cord

4.Cord tidy heel

5.Soleplate

1