the mini-chopper.

-Connect the appliance and start using the speed control (a2), (Fig. 2), initially at speed 1 then 2, 3, 4, 5. Use the Turbo button (a2) if the recipe requires more power.

-Once the preparation is finished, stop the appliance and disconnect it.

-Remove the appliance and then the reducer (n3).

-Remove the blade (n2) holding it by the plastic part.

-After use, remove the food.

-Do not operate this accessory empty.

800ML BLENDER BOWL FUNCTION (DEPENDING ON MODEL)

-Place the bowl (o1) on the stabiliser base (q).

-Place the blade (o2) on the shaft of the bowl (o1).

-Place the food in the bowl (o1) and then place the leak-tight lid (o3) and the reducer (o4).

Check that the appliance is unplugged, that the speed control (a2) is set to "0" and that the beaters or kneaders are no longer on the appliance.

-Lift the panel at the back of the appliance and place the appliance on the reducer (o4) of the blender bowl.

-Connect the appliance and start using the speed control (a2), (Fig. 2), initially at speed 1 then 2, 3, 4, 5.

Use the Turbo button (a2) if the recipe requires more power.

-Once the preparation is finished, stop the appliance and disconnect it.

-Remove the appliance, the reducer (o4) and then the lid (o3).

-Remove the blade (o2) holding it by the plastic part.

-After use, remove the food.

-Do not operate this accessory empty.

15