TE_SORBETIERE_NORD_EN_2551162_NORD 23/02/12 09:18 Page9

Safety features

The product is equipped with a safety device that stops the appliance automatically if it overheats. Overheating may occur if the recipe you are preparing is very thick or if the ice cream maker runs for too long or if the ingredients added (e.g. nuts, etc.) are not chopped finely enough. To start the ice cream maker again, press the ON/OFF button and let it cool down. After a few minutes you can start it up again.

Do not run the ice cream maker longer than necessary.

EN

CAUTION:

Do not run the ice cream maker inside the freezer or the refrigerator.

Cleaning instructions

Disassemble the appliance.

Only the lid (without the motor unit) and the paddle can be washed in the upper rack of the dishwasher.

The bowl and rings can be cleaned in warm water and washing up liquid (do not use hot or boiling water as it could lead to expansion and damage the cooling bowl).

The motor unit must not be washed in the dishwasher. Just wipe it with a damp cloth.

Never clean the parts with abrasive products, as this could damage them.

Dry the bowl thoroughly before putting it back in the freezer (without the rings). If you are not returning it to the frezzer, leave the cooling bowl to thaw at room temperature in the sink, then dry thoroughly before storing.

Advice and tips

PREPARATION

Ice cream preparations containing a high proportion of sugar, fats or alcohol may require more time to freeze or may even not stiffen.

Alcohol inhibits the freezing process so we advise you only add alcohol once the ice cream maker is running and the preparation is already half frozen.

We advise you to prepare the ingredients before taking the bowl out of the freezer so that the bowl will be as cold as possible on start-up.

9