Mode?le Notice COCOON 1:Mise en page 1 27/05/08 13:29 Page 8

Use

1TO OPEN THE LID :

Push the button backwards then open the lid from the front towards the back. fig 2

To close the lid, press it down firmly.

2PLACE THE BASE ON a clean, flat, stable, heat resistant surface, away from sources of heat and water splashes.

3 FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER. fig 3

4POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.

5TO START THE KETTLE

Press the on/off button positioned at-the bottom of the handle, the red indicator light on the front of the kettle will light up. fig 4

6THE KETTLE WILL SWITCH OFF AUTOMATICALLY

as soon as the water reaches boiling point. You can stop it manually, by removing it from its base to pour the water.

Throw away the water from the first two/three uses as it may contain dust. Rinse the kettle and the filter separately.

7SELECTING THE KEEP WARM FUNCTION

You can keep your water warm with the Keep warm function.

After switching on your kettle (red indicator light lit), press the KEEP WARM

button firmly, and the KEEP WARM indicator light will turn white.

0,3L

Once the kettle has boiled, the red indicator light will be automatically extinguished and the orange indicator light will light up to indicate that the KEEP WARM function is activated for one hour.

After one hour, the kettle will switch itself off automatically and the KEEP WARM function will stop working.

The KEEP WARM mode may be stopped at any time:

-by pressing the KEEP WARM button

-by removing the kettle from its base.

The user can reactivate the KEEP WARM mode once the kettle has been placed back onto its base by pressing the KEEP WARM button again. Then only the white KEEP WARM indicator light is lit.

The water must be boiled before the KEEP WARM mode can be selected. The kettle must be boiled every time that more cold water is added to the kettle to be able to reactivate the KEEP WARM mode.

You can fill it through the spout, which ensures better maintenance of the filter. For a minimum amount of watercover the bottom of the kettle) with water.

Never fill the kettle when it is on its base.

Do not fill it above the maximum level. If the kettle is too full, boiling water may spill out.

Do not use without water.

Check that the lid is closed properly before use.

Only use the kettle for boiling water.

8

Page 8
Image 8
Tefal KO304131 To Open the LID, Fill the Kettle with the Desired Amount of WATER. fig, Selecting the Keep Warm Function