TD7310Q0_2000942955_sterilisvapeur 01/12/11 11:12 Page5
Description
1.
2.Six removable bottle support rods
3.Lid grip button
4.Lid
5.Removable lower support grid
6.On/Off button
7.On indicator
8.Reservoir
9.Tank
10.Three height adjustment positions for the upper support grid
Precautions on use
The various drawings are intended only to illustrate the features of your appliance, and are not to be taken as strictly true to life.
Never plug in the appliance without water.
Never open the appliance whilst it is in operation, you run the risk of burning yourself.
Wait at least 4 minutes after the end of the sterilization cycle before opening the lid.
Feeding bottles, comforters and accessories, as well as any other utensils (dummies, spoons etc.) can be sterilised as long as they can stand a temperature of over 203°F / 95°C for a period of 15 minutes. Important: always make sure you clean them thoroughly before sterilising.
Caution: bottles, teats and caps will be hot after sterilisation.
Please allow at least 4 minutes after the end of the sterilisation cycle before opening the lid, so as to avoid any risk of burning yourself and to ensure complete sterilisation.
– Wait 15 minutes between 2 sterilizations in order for appliance to cool between cycles.
Using your appliance
Before using for the first time
Unpack the appliance and its accessories. Clean them.
Place the lower grid | A | at the bottom of the tank. Put the bottle support rods in place |
(fig. 1). |
|
|
Place the upper grid | B | (visible marker upwards) into one of the 3 notches provided for |
adjusting the height.
Using a bottle, pour 6,33 fl.oz / 190 ml of water into the tank’s reservoir (fig. 2). Caution, when the appliance is plugged in for the first time, it automatically starts to run a complete cycle.
On first use, a slight amount of smoke may be given off.
EN NL DE IT EN ES PT EL TR RU UK PL CS SK HU BG RO HR SV FI DA NO KZ
5
