Connection and pre-heating

Close the appliance.

Plug the cord in the wall socket: the red light comes on A .

During first use, the appliance may give off a slight odour and smoke. This is normal.

Check that your electric supply is compatible with the power and the voltage indicated under the appliance.

Connect the appliance to a wall socket with an earth connection.

If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Cooking

Allow the appliance to pre-heat, the green light comes on when the correct cooking temperature is reached B .

Do not touch the metallic surfaces of the appliance during pre-heating, because they are very hot.

Select the desired temperature using the thermostat C .

Open the appliance.

Pour the waffle batter into the centre of the hollow part of the plate D .

Immediately close the appliance, using the handle, so that the batter is evenly distributed over the whole surface of the plate E .

Do not hold onto the handle of the appliance during cooking, as this will prevent the batter from rising.

FrançaisEnglish