USE
1) BURNERS
Adiagram is
- Manual ignition
Push and turn the knob corresponding to the required burner in an anticlockwise direction until it reaches the full on position (large flame fig. 1), then place a lighted match near the burner.
- Automatic electrical ignition
Push and turn the knob corresponding to the required burner in an anticlockwise direction until it reaches the full on position (large flame fig. 1), then depress the knob.
- Lighting burners equipped with flame failure device
The knobs of burners equipped with flame failure device must be turned in an anticlockwise direction until they reach the full on position (large flame fig.1) and come to a stop. Now depress the knob in question and repeat the previously indicated operations.
Keep the knob depressed for about 10 seconds once the burner has ignited.
HOW TO USE THE BURNERS
Bear in mind the following indications in order to achieve maximum efficiency with the least possible gas consumption:
-Use adequate pans for each burner (consult the following table and fig. 2).
-When the pan comes to the boil, set the knob to the reduced rate position (small flame fig. 1).
-Always place a lid on the pans.
-Use only pan with a flat bottom.
Burners | Power ratings | Pan Ø in cm |
Ultra rapid | 3100 | 24 ÷ 26 |
Rapid | 2800 | 20 ÷ 22 |
Semirapid | 1750 | 16 ÷ 18 |
Auxiliary | 1000 | 10 ÷ 14 |
WARNINGS:
-Burners with flame failure device may only be ignited when the relative knob has been set to the Full on position (large flame fig. 1).
-Matches can be used to ignite the burners in a blackout.
-Never leave the appliance unattended when the burners are being used. Make sure there are no children in the near vicinity. Particularly make sure that the pan handles are correctly positioned and keep a chek on foods requiring oil and grease to cook since these products can easily catch fire.
-Never use aerosols near the appliance when it is operating.
-If the
FIG. 1
FIG. 2
3