
2 Remove the controls of the taps by pulling firmly upward and remove the gasket.
3Use a slim, grooved screwdriver to turn the screw that is next to the shaft of the gas tap (detail "A" in figure 3).
4When properly adjusted, check that the flame does not go out when you turn the knob quickly from maximum to mini- mum.
TEKA INDUSTRIAL, S.A. will not accept liability for any hob malfunction if the gas conversion or the adjustment of the mini- mums of the burners has not been carried out by TEKA's Technical Service.
GB
Table 1
Burner |
| Family | |
| Second | Third | |
| Group H | Group 3+ | |
Triple ring | 135 | T | 95 |
|
|
| |
Fast | 116 Y | 85 | |
|
|
|
|
97 | Z | 66 | |
|
|
|
|
Auxiliary | 72 | X | 50 |
|
|
|
|
Ø injector in 1/100 mm
fig. 3
Front view of the gas tap
9