5.When the cycle is finished, the oven will
turn itself off, an alarm will sound and
symbol 
will flash quickly.
6.Touch any sensor with your fingertip to stop
the alarm and to turn off symbol 
.
7.Turn the control dial to position 
.
8.Any traces of dirt and excess water can now be removed with a damp cloth.
IMPORTANT
Do not open the oven door until the cleaning programme has completely finished as the cooling phase is necessary for it to work pro- perly.
The cleaning programme should be done at a low temperature. When it has finished, any residue can be safely removed with a damp cloth. Cooling times vary depending on the room temperature. Before touching any inside surface of the oven, check that it is cool.
How to use the
Teka Hydroclean® enamel’s excellent proper- ties mean that any traces of cooked food can easily be removed from the trays. If stubborn traces of cooked food remain after normal cleaning, do the following:
1.Place the tray that needs cleaning on the middle shelf support.
2.With the oven cold, slowly pour 250 ml of water into the tray.
3.Select the Teka Hydroclean® cleaning func- tion.
IMPORTANT
Teka Hydroclean enamel has been designed to be cleaned using the oven’s automatic cleaning programme and other cleaning methods can damage it.
Dishwasher detergent is not recommended for washing Teka Hydroclean enamelled oven trays. If deep cleaning is needed, use a gentle detergent.
Some foods such as tomato, vinegar or salt- cooked roasts, can make the enamel’s surface appear to change; this is normal.
ENGLISH
Fold-down Grill Element
To clean the top of the oven,
•Wait until the oven is cold.
•Push the rod of the grill element (A) with both hands until it is released from the upper fastening point.
•Rotate the element and clean the top of the oven.
•Finally, place the grill element back in its original position.
A |
23 |
