Command Descriptions
3–32 VX4380 256-Crosspoint Relay Matrix Module User Manual
Command Response
#$" ! Open all relays in section 1 of the first VX4380, then wait 0.1
seconds.
#$" ! 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
This response indicates that all relays in section 1 of the first
VX4380 are open.
!#' "!
N/A
All relays on all modules are set to the open position.
N/A
[ROUTe:]CLOSe,
[ROUTe:]MODule:DEFine
If a module name is not specified in this command, open all relays on all
modules controlled by the Option 01. If a module name is specified, open all
relays on the specified module only. In either case do not change the state of the
configuration relays on VX4380 Modules.
Command Response
Open all relays on all modules controlled by the Option 01. Do
not change the state of the configuration relays on VX4380
Modules.
%#'&#$" Same as the first example.
%#'&#$" $ Open all relays on the module that has been assigned module
name “gp”. See the [ROUTe:]MODule:DEFine command.
!#' "!"%
N/A
Command Syntax
Query Syntax
*RST Value
Limits
Related Commands
Description
Examples
Command Syntax
Query Syntax