IMPORTANT SAFETY INSTRUCTIONS
This symbol is to alert you to important operating or servicing instructions that may appear in the user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electrical shock.
When using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1.Read and understand all instructions.
2.Follow all warnings and instructions that are marked on the product.
3.Use only with class 2 power source DC 9V 300mA.
4.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
5.Do not use this product near water; for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
6.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
7.Slots and openings in the cabinet back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in an enclosed environment unless proper ventilation is provided.
8.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by animals or persons walking on it.
9.Do not overload wall outlets and extension
10.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock. Never spill liquid of any kind on the product.
11.To reduce the risk of electrical shock, do not disassemble this product. Instead, take it to a qualified service person when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect
12.Unplug all cords and refer servicing to qualified service personnel under the following conditions:
A.When the power supply cord or plug is damaged or frayed.
B.If liquid has been spilled into the product.
C.If the product has been exposed to rain or water.
D.If the product does not operate normally by following the operating instructions. Adjust only those controls covered in the operating instructions. Improper adjustment of other controls may result in damage and require work by a qualified technician to restore the product to normal operation.
13.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
14.Do not use a telephone to report a gas that is near the leak.
IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED:
1.Use only the type and size of batteries specified in the users manual.
2.Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions.
3.Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
4.Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets and keys. The battery or conductor may overheat and cause burns.
5.Do not attempt to recharge the batteries that are with or identified for use with this product. The batteries may leak corrosive electrolyte or explode.
6.Do not attempt to rejuvenate the batteries provided with or identified for use with this product by heating them. Sudden release of the battery electrolyte may occur causing burns or irritation to eyes or skin.
7.When replacing batteries, all batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged batteries.
8.When inserting the batteries into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause charging, which may result in leakage or explosion.
9.Remove the batteries from this product if the product will not be used for a long period of time (several months or more) since during this time the batteries could leak, damaging the product.
10.Discard “dead” batteries as soon as possible since they are more likely to leak in a product.
11.Do not store this product, or the batteries provided with or identified for use with this product, in high temperature areas.
12.If your product uses a rechargeable battery, charge the battery(ies) only in accordance with the instructions and limitation specified in the Users Manual.
SAVE THESE INSTRUCTIONS
GETTING STARTED
PACKAGE CONTENTS
Check to be sure that you have all the following components in the package:
1.Telephone base
2.Handset
3.Handset coiled cord
4.4 conductor telephone line cord (qty. 2)
5.Short telephone line cord
6.Desk/Wall mount bracket
7.AC power adapter
8.Screwdriver for battery door
9.This instruction manual
FEATURES
•Up to 4 line capability
•8
•Desk or wall mountable
•Caller ID
•Speakerphone
•Up to 32
•Last number redial
•Line status indication
•Hold
•Conference calling
•Headset compatible
•Mute
•Pause
•Temporary tone dialing
•Flash
•Call timer
•Automatic line selection
•Incoming call list
•Digital speaker volume control
•LCD displays date, day and month
•Ringer on/off and volume control
5 | 6 |
