Teledyne MODEL T703 7.1.7.5. COM Port Password Security

Teledyne API T703 Calibrator Operation Manual Operating The T703 over the Serial I/O Ports
115
7.1.7.5. COM Port Password Security
In order to provide security for remote access of the T703, a LOGON feature can be enabled to require a
password before the instrument will accept commands. This is done by turning on the SECURITY MODE (Mode
4, Section 7.1.4). Once the SECURITY MODE is enabled, the following items apply.
 A password is required before the port will respond or pass on commands.
 If the port is inactive for one hour, it will automatically logoff, which can also be achieved with the
LOGOFF command.
 Three unsuccessful attempts to log on with an incorrect password will cause subsequent logins to be
disabled for 1 hour, even if the correct password is used.
 If not logged on, the only active command is the '?' request for the help screen.
 The following messages will be returned at logon:
 LOGON SUCCESSFUL - Correct password given
 LOGON FAILED - Password not given or incorrect
 LOGOFF SUCCESSFUL - Connection terminated successfully
To log on to the T703 calibrator with SECURITY MODE feature enabled, type:
LOGON 940331
940331 is the default password. To change the default password, use the variable RS232_PASS issued as
follows:
V RS232_PASS=NNNNNN
Where N is any numeral between 0 and 9.
07223B DCN6378