More EQ Menu and Display.
Accessed by pressing the More EQ key from the
Soft key options: Filters
A : B : Link
In/Out
Exit
More EQ Display
In More EQ mode, the display shows the frequency response curve calculated from the Notch filter and High Pass and Low Pass filter settings.
CURVE/FADER
When the CURVE/FADER key is pressed, the display incorporates the Graphic fader positions into the calculated frequency response curve.
Filters
Soft key 1 is accompanied by the text Filters. Pressing this key selects Filter Adjust mode. See below.
A : B : Link
Soft key 2 is accompanied by the text A : B : Link. Pressing this key toggles between addressing channels A and B. If the key is held for more than 1 second, the Link mode is selected. In Link mode, all fader adjustments affect both channels. If Link mode is entered from channel A, channel A is displayed and channel B follows it. If Link mode is entered from channel B, channel B is displayed and channel A follows. The A : B : Link status is shown at the top of the screen as =A=, =B=, A+B, or B+A.
Selection of Link only links the operation of the two channels, it does not copy details between the channels except when changes are made to certain settings. Full details are provided below in the section headed Filter Adjust Menu and Display.
In/Out
Soft key 3 is accompanied by the text In/Out. When pressed, the High and Low pass filters and two Notch filters are switched in or out of circuit. When the channels are linked the currently displayed channel acts as the master with new settings copied to the alternate channel. The In/ Out status is highlighted on the menu. When the filters are out of circuit, the Filters key is disabled and the display shows a flat frequency response.
Exit
Soft key 4 is accompanied by the text Exit. When pressed, the key returns the unit to the start up display and menu.
22
