MIDI Chan
Soft key 2 is accompanied by the text MIDI Chan. Pressing this switch enables the selection of MIDI send and receive channels. By use of the FREQ or LEVEL rotary control, select either OMNI ON mode (receive all channels, send on channel 1) or OMNI OFF mode and one of MIDI channels 1 to 16.
The procedure may be aborted at any time by pressing the Exit key.
To complete the selection, press the MIDI Chan key a second time. The unit updates its MIDI channel number and returns to the start up screen.
The DN3600 recognises MIDI program change messages 1 to 66 on its assigned channel, and maps them to recall memories 1 to 66.
Also, the DN3600 sends MIDI program change messages 1 to 66, mapped to memory recall commands entered via the front panel.
Adj. LCD
Soft key 3 is accompanied by the text Adj. LCD. This key allows access to the LCD adjustment screen. When this key is pressed, the menu options change to:
Inv LCD
Exit
Inv LCD
When pressed, this switch toggles the LCD screen between Normal display (white or green characters and graphics on a blue screen) and Inverted display (blue characters and graphics on a white or green screen). After toggling the display the unit remains in the Adj. LCD screen.
Frequency Encoder
The frequency encoder may be used to adjust the display brightup time out. The time can be adjusted between 2 and 60 seconds. The setting is retained in power down.
Level Encoder
The level encoder is used to adjust contrast of the LCD. The setting is retained on power down.
Exit
Soft key 4 is accompanied by the text Exit. When this switch is pressed, the unit returns to the start up menu.
29
