DN9848 Key Features

1.INTRODUCING THE DN9848

The DN9848 is a highly configurable, digital electronic cross-over/loudspeaker management system comprising four balanced analogue input channels and eight balanced analogue output channels. Its unrivalled routing flexibility enables each output to be sourced from a single input, a pair of inputs, or all four inputs.

Each input channel features:

12 separately configurable, fully parametric equalisation stages that may be used for room equalisation

A programmable delay of up to 1000ms Gain control

Full range compression Each output channel features:

Configurable high and low-pass filters for setting the cross-over characteristics

Six stages of fully parametric equalisation that may be used to compensate for system or enclosure characteristics

Delay of up to 300ms on each output, mainly used for system time alignment Gain control and output muting

Full range compression and full range limiting

Dual all-pass phase correction sections, the first of which can be any of the filter or parametric EQ stages and can be adjustable in 5 degree steps

The cross-over filter may be chosen from the following types: 12dB/oct and 24dB/oct peaking (high-pass filter only) Butterworth (6, 12, 18, 24, 36 and 48dB/octave) Linkwitz-Riley (12 and 24dB/octave)

Bessel (12, 18, 24, 36 and 48dB/octave)

Channel programming can be performed directly from the front panel controls or remotely using the associated Stardraw software application or Smaart real-time analysis software (via the RS-232 PC Port or RS-485 COMMS connectors). If required, access to critical parameter menus can be password protected, e.g. to avoid unauthorised adjustments in hire installations.

Commonly used settings can be stored for repetitive use in up to 32 lockable System memories while varying show settings can be stored in up to 5 User memories. Also 99 Presets can be stored in non- volatile Flash memory, including up to 25 available Factory Preset cross-over set ups for commonly used Electro-Voice loudspeaker systems.

Klark Teknik has a policy of continuous development and may produce updates to the DN9848 host code. These can be downloaded to the unit via the front panel PC Port. To keep up with newest features and functions, please visit www.klarkteknik.com.

DOC02-DN9848, DN9848 Loudspeaker Processor specifications

The Telex DOC02-DN9848, commonly referred to as the DN9848 Loudspeaker Processor, is an advanced audio processing device designed to enhance sound quality in both live and recorded environments. With a sleek and modern design, the DN9848 is engineered to meet the demanding needs of professional audio applications, be it in concert venues, theaters, or broadcast studios.

One of the key features of the DN9848 is its comprehensive processing capabilities. Equipped with a powerful DSP (digital signal processing) engine, it offers extensive equalization options, dynamic range control, and advanced crossover functionality. The device utilizes up to 48 input and output channels, allowing for unparalleled flexibility in routing audio signals. This makes it ideal for installations that require precise control over multiple loudspeakers.

The DN9848 also boasts an intuitive user interface, which facilitates straightforward navigation through its various functions. The front panel features a large LCD display that provides clear visibility of parameters, and a selection of knobs and buttons enables easy adjustments. For remote operation, the device can be controlled via Ethernet, allowing technicians to make changes from virtually any location.

Another standout aspect of the DN9848 is its customizable algorithms that accommodate different speaker systems and acoustical environments. Users can fine-tune the processor to optimize performance for specific venues or loudspeakers. The device supports both FIR (finite impulse response) and IIR (infinite impulse response) filters, providing users with the flexibility to deploy advanced filtering techniques according to their needs.

The DN9848’s robust connectivity options further enhance its utility. It features standard analog XLR connectors, as well as digital interfaces that include AES/EBU and Dante. This multi-format compatibility ensures seamless integration into existing audio setups, making it a versatile choice for audio professionals.

In terms of reliability and durability, the DN9848 is built to withstand the rigors of the professional audio world. Its rugged chassis and high-quality components ensure that it can perform consistently in various conditions, making it a trusted partner for sound engineers.

In summary, the Telex DOC02-DN9848 Loudspeaker Processor combines sophisticated audio processing capabilities with user-friendly features and robust connectivity. Its advanced technology and flexible options make it an indispensable tool for achieving optimal sound in a variety of professional audio environments.

Telex DN9848 Loudspeaker Processor, DOC02-DN9848 DN9848 Key Features, Introducing the DN9848

Models: DOC02-DN9848 DN9848 Loudspeaker Processor