Telex DOC02-DN9848 Controls, Connectors, Indicators, Front Panel, Input channels A-D, knobs

Controls, Connectors, Indicators

2.FRONT PANEL

1	2	3		5
			4

	6		7		8	9
1	Input channels A-D
			Menu Access		Press to access and step through the menu pages for the
			Buttons A-D		respective input. The available pages depend on the current
					security setting. The button is lit when active.
			Signal Level		9-segment signal meters for monitoring signal level
			Meters A - D		(compressor headroom and gain reduction) and clip on the
					respective channels.
2	Recall button				Press to access the Recall menu page from which a User,
					System or Preset memory can be selected for recall.

3Alphanumeric display Displays menu pages for viewing/defining parameter values. Values are adjusted via the DATA ENTRY encoders knobs.

4Home (Set Up) button Press to exit current menu page and return to default Home page. Press and hold for 1 second to access Set Up menu, then press to step through Set Up pages.

5Output channels 1 - 8

	Menu Access	As for input channels.
	Buttons 1-8	11-segment signal meters for monitoring signal level
	Signal Level
	Meters 1 - 8	(compressor/limiter headroom and gain reduction) and clip
		on the respective channels.
	Output level and	Potentiometer control for fine-tuning/muting of output level.
	mute control	Zero level refers to the level set in the output menu. Turn
		control to increase/decrease level or press to mute. Red ring
		lights when mute is active.
6	Data entry encoder	Used to set parameter values on menu pages
	knobs	(see Section 4.1).
7	Store button	Press to access the Store menu page for storing User or
		System memories.
8	PC port	8-pin mini-DIN socket for connecting to an RS-232 serial
		port on a PC or other remote control device. (XLR connector
		is provided on the rear panel for remote control via RS-485.)
9	Power button	Press to switch the unit on or off.

4