Input Channels
5.INPUT CHANNELS
5.1. Brief Technical Overview
Referring to the illustration below, each input channel of the DN9848 processes the audio signal through delay and gain stages, followed by 12 bands of parametric equalisation, and a
5.2. Setting Input Parameters
5.2.1The Input Menu
The signal processing for each input channel is programmed independently via the separate Input menu associated with each channel. The signal processing parameters are described below in menu order.
To access the Input menu pages for a particular channel
1Press its yellow MENU ACCESS button (A – D) to switch to its menu.
2Press the button repeatedly to step through the pages in turn. Note that, after the last page, the next button press will cycle the menu back to the first page.
To skip across to the same parameter on another input, press its MENU ACCESS button.
5.2.2Naming the Input Channel (Page 1)
Each input channel can be allocated a name up to 7 characters long, which will be shown in the first page of the menu for easy reference. The default names are Input A, Input B, etc. Names are retained after power down and are included in stored settings.
To enter a name
User defined channel name
1Turn the
2Use the centre knob to move the cursor right or left, and the
3On completion, turn the
9