Headband Size Adjustment
To adjust the headband size, move the earcup sliders up or down on the headband. Size is properly adjusted when the earcups are centered over the ears. It is important to make the same adjustments to both sides of the headband to keep the headband and pad properly centered over the head.
Headband Pressure Adjustment
There are three pressure settings for headband comfort. Increasing the pressure will improve the seal between the earcup and the head for greater noise reduction. To change the pressure setting, remove the headset and fold the earcup inward as shown, then rotate the Comfort Cam adjustment knob to the desired setting. Repeat for both earcups. Both sides of the headband should be set to the same pressure setting to keep the headband properly centered on the head.
Figure 1
Headband Size Adjustment
Comfort Cam™
ADJUSTMENT KNOB SETTINGS
HIGH MEDIUM LOW
Figure 2
Headband Pressure Adjustment
Left or Right Side Microphone Placement
1. Rotate the boom as shown.
2.Reshape the boom so that the
microphone will be at the corner of the mouth.
Figure 3
Rotating and Reshaping the
Boom
Page 1
