Make sure the “signal path” between the transmitter and receiver(s) is unobstructed. You should always be able to visually locate the antenna of the trans- mitter at all times.
RadioCom
Telex power
Monitor
set | |
WIRELESS IFB TRANSMITTER |
SIGNAL REACHES ANTENNA AT FULL STRENGTH WITH NO OB- STRUCTIONS.
Figure 12
Keeping Site Clear to Antenna
Attempting to operate the sound enhancement sys- tem through or around walls, ceilings, metal objects, etc., will reduce system range and performance.
RadioCom | Telex power |
| Monitor |
set | |
WIRELESS IFB TRANSMITTER |
SIGNAL REFLECTION OFF A METAL OBSTRUCTION CAUSES REDUCED SIGNAL AND “MULTIPATH”
Figure 13
Operating Through Obstruction
DO NOT - Mount the transmitter on, or next to, metal such as beams, walls with metal studs, etc. This will “detune” the transmitter antenna which can result in loss of signal at the receiver.
LOCATION
IS OK
TM | Telex |
|
RadioCom | Monitor | power |
set | ||
Telex | LOCATION | |
IS BAD | ||
| ||
RadioCom Monitor | power | |
TM Telex | ||
| ||
WIRELESS IFB TRANSMITTER set | ||
Figure 14
Transmitter Antenna Placement
