Displays
1. A 5 segment LED light array for AF that aids in setting microphone
gains and monitoring receiver microphone and line level outputs.
Light numbers 4 and 5 have a Peak Hold feature.
2. A 1 segment LED light for RF that aids in checking the transmitter
and monitoring for the possibility of initial interference.
3. A 2 segment LED array that indicates diversity action and antenna
configuration.
Audio Outputs
An XLR type connector and 1/4" phone jack are located on the rear
panel providing either line level or microphone level audio output.
The line output level is adjustable with a screwdriver accessible
potentiometer.
Power
The UR-700 will operate from the supplied AC adapter or any
nominal 12-15 volt AC/DC 300 mA supply.
Audio
The UR-700 audio circuitry is designed to complement the transmit-
ter audio. A compandor circuit is utilized to enhance the dynamic
range.
-2-