Telit Wireless Solutions UC864 manual 10k +1.8

UC864-E Hardware User Guide

1vv0300766a Rev.1 - 31/01/08

For example:

1- Let's assume you need to drive the RESET# pad with a totem pole output of a +1.8/5 V micro controller (uP_OUT2):

10k

+1.8 / 5V

* This signal is internally pulled up so the pin can be left floating if not used.

NOTE: If UC864-E is connected as USB slave (considering also the presence of VBATT supply), when powered off it automatically switch on again.

Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 16 of 51