Installation

Smart

Prior to installation, locate the area where the XM Universal Tuner

Box is installed. Make sure you have followed the location

 

 

requirements for the XM Universal Tuner prior to installing the

 

Pioneer Smart Digital Adapter.

 

Step 1

Digital

Remove the Pioneer car stereo head unit from your dash board.

Important: Depending on how your Pioneer head unit was

 

 

installed you may have to remove part or all of your dash board to

 

remove the head unit before the Pioneer head unit can be pulled

 

out. You may also have to remove screws to complete this step.

Adapter

Step 2

Connect the red and white audio cables into the red and white

 

 

connectors on the XM tuner box (XMD1000) as well as the thinner

 

black cable with straight connector. Plug the other end of these

 

three cables into the top of the Pioneer smart digital adapter as

 

shown in Fig 2.

Fig 2

Adapter

Tuner

grounded

 

Step 3

 

Connect the thick black cable with the right angle connector into

 

the bottom of the XMDPIO110. Make sure you use the right angle

 

connector that has the three pin power plug on that end of the

 

cable. Plug the three pin power plug into the corresponding

 

connector on the bottom of the XMDPIO110 as shown in Fig 2.

3

The short thin black cable coming out of the three pin power plug

needs to be grounded. Please secure the end of the cable to a non

moving piece of metal.

Note: Make sure that all of the cables are connected securely.

SmartDigital

Step 4

Connect the other end of the thick black cable with the right angle

 

 

connector into the corresponding connector on the back of your

 

Pioneer head unit. Take the thin power cable with the fuse holder

 

and connect it to a constant 12V power source as shown in Fig 3.

Adapter

Fig 3

 

 

Note: The location of the connectors on the back of the Pioneer

 

head unit may vary by model.

 

Step 5

 

Start your car and turn on your Pioneer head unit to confirm that

 

the XM Direct system is properly connected. When you tune to

 

XM channel 01, you should see “XM Preview” on your Pioneer

 

head unit LCD, and hear that channel through your car speakers.

 

If not, check to make sure all connections are correct or refer to

 

the trouble shooting section of this installation guide.

 

Step 6

 

Mount and secure the XMDPIO110 in a suitable location that

 

will not interfere with the radio and will not vibrate or rattle

 

after installation.

4

Page 2 Page 4
Page 3
Image 3
TERK Technologies XMDPIO110 warranty Installation, Head unit may vary by model
Page 2 Page 4

XMDPIO110 specifications

TERK Technologies XMDPIO110 is a state-of-the-art HD radio antenna designed to enhance your listening experience while providing superior performance and convenience. As the demand for high-quality audio content continues to rise, this antenna steps up to the plate, promising to deliver exceptional sound quality and an extensive range of FM and AM radio stations.

One of the standout features of the XMDPIO110 is its compact and sleek design, making it an attractive addition to any home entertainment setup. Its modern aesthetic ensures that it blends seamlessly with your existing décor, allowing you to enjoy great audio without compromising your space. Despite its small footprint, this antenna boasts impressive signal reception capabilities, ensuring that you can listen to your favorite stations without interruptions or poor sound quality.

Equipped with advanced technologies, the XMDPIO110 utilizes 360-degree reception to capture signals from all directions. This omnidirectional capability is particularly beneficial for users in urban environments where obstacles can obstruct signal transmission. The antenna is also engineered with high-gain performance, which enhances its ability to pick up distant radio frequencies. As a result, users can access an array of channels, including those broadcasting in HD, providing clear and crisp sound that brings music and talk shows to life.

Another significant characteristic of the XMDPIO110 is its easy installation process. Users can quickly set up the antenna using the included mounting hardware and instructions, allowing for both indoor and outdoor placement. Whether you want to mount it on a wall, place it on a tabletop, or set it on a shelf, the flexibility of installation options ensures that you can find the perfect spot for optimal performance.

Additionally, the XMDPIO110 is compatible with a wide range of radio models, making it a versatile choice for various audio setups. Its robust construction ensures durability and longevity, meaning that you can enjoy high-quality radio listening for years to come. With support for multiple frequencies and enhanced audio clarity, this antenna represents an excellent investment for any audio enthusiast or casual listener alike.

In conclusion, the TERK Technologies XMDPIO110 is a remarkable antenna that combines sleek design with cutting-edge technology, making it an essential accessory for anyone looking to elevate their radio listening experience. With its exceptional performance, ease of installation, and compatibility with numerous devices, the XMDPIO110 stands out as a top choice in the world of HD radio antennas.
Top Page Image Contents