Chapter 2
Quick Start
The steps in this chapter can be followed to quickly prepare the TPA122 MSOP audio amplifier EVM for use. Using the TPA122 MSOP EVM with the TI
The platform switch and jumper settings shown in Table 2±1 are typical for the TPA122 MSOP EVM and will cause the TPA122 IC to shut down/mute when a plug is removed from platform headphone jack J10.
Table 2±1. Typical TI
EVM | JP6 | JP7 | JP8 | S2 | S3 |
|
|
|
|
|
|
TPA122 | X | Hi | X | Note 2 | U5 |
Notes: 1) X = Don't care
2)Set S2 to ON when signal conditioning board is installed in U1; set S2 to OFF when no signal conditioning board is installed.
Topic |
| Page |
|
|
|
2.1 | Precautions | . . 2±2 |
2.2 | Quick Start List for Platform | . . 2±3 |
2.3 | Quick Start List for | . . 2±4 |
|
|
|