Texas Instruments THS3001 manual Features, Description

Features

1.1 Features

THS3001 operational amplifier EVM features include:

JHigh Bandwidth Ð 340 MHz, ±3 dB at ± 15 VCC & Gain = 2

J± 5-V to ± 15-V Operation

JInverting and Noninverting Single-Ended Inputs

JModule Gain Set to +2 (Noninverting) and ±1 (Inverting) Ð Adjustable Through Component Change.

JNominal 50-ΩImpedance Inputs and Outputs

JStandard SMA Miniature RF Connectors

JGood Example of High-Speed Amplifier Design and Layout

1.2 Description

The TI THS3001 high-speed current-feedback operational amplifier evaluation module (EVM) is a complete high-speed amplifier circuit. It consists of the TI THS3001 high-speed current-feedback operational amplifier IC, along with a small number of passive parts, mounted on a small circuit board measuring approximately 1.7 inch by 1.4 inch. The EVM uses standard SMA miniature RF connectors for inputs and outputs and is completely assembled, fully tested, and ready to use Ð just connect it to power, a signal source, and a load (if desired).

Two versions of the THS3001 EVM are available. The original appears in Figure 1±1 and the Rev. A version appears in Figure 1±2.

Figure 1±1. THS3001 Evaluation Module ± Original Version

±VCC

+VCC

GND

J3

±IN

GND

C3

R5 + + C1

INVERTING

R1

U1

C2

J2

OUT GND

NONINVERTING	R4
	R2
R3	C4
+IN
GND
J1	LITERATURE NO
	SLOP 130

009957 THS3001 EVM

1-2 General Information