Texas Instruments TI-36X manual For x‡ x=0 y0 and x not an odd integer

DOMAIN - You specified an argument to a function outside the valid range. For example:

•For x‡: x=0; y<0 and x not an odd integer.

•For yx: y and x=0; y<0 and x not an integer.

•For ‡x, x<0.

•For x!: x is not an integer between 0 and 69.

•For Boolean and, or, xor: x or y in Hex out of range (>239).

•For log or ln: x 0.

•For tan: x=90¡, -90¡, 270¡, -270¡, 450¡, etc.

•For sin-1or cos-1: x > 1.

•For tanh-1(x): x>1.

•For cosh-1(0).

•For cosh-1(x): x<0.

•For nCr or nPr: either n or r is not an integer 0.

•æ ‚ 1E10, where æis an angle in a trig or P4Rx(, P4Ry( function.

STAT -

•Pressing 8with no defined data points.

•When not in STAT mode, pressing 7, 8, or %h.

COMPLEX - Using a complex number incorrectly in an operation or in memory.

BASE - Using a base incorrectly or in the wrong mode.

INTEGRATE - Error in setting up integration problem:

•A>B, or

•C not integer 1-99, or

•A, B, or C undefined.

44

Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 44 of 48