Stored Operations
The TI-36X üstores two operations, Op1 and Op2. To store an operation to Op1 or Op2 and recall it:
1.Press %bor %c.
2.Enter the operation, beginning with an operator (such as +, M, Q, P, or ^). You can store any combination of numbers, operators, and menu items and their arguments, to a limit of 47 characters or items.
3.Press Vto save the operation to memory.
4.Each subsequent time you press 2or 3, the TI-36X ürecalls the stored operation and applies it to the last answer. The expression with the stored operation appears on the first line of the display, and the result appears on the second line. A counter on the left side of the result line displays the number of consecutive times you have pressed Op1 or Op2.
You can set the TI-36X üto display only the counter and the result, and not the expression on the entry line. Press %bor %c, press !until the = is highlighted (û) and press V. Repeat to toggle this setting off.
16
Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 16 of 48
