Texas Instruments TPA005D12 manual Quick Start, Chapter, Page, Topic, Precautions

Chapter 2

Quick Start

Follow the steps in this chapter to quickly prepare the TPA005D12 class-D stereo audio amplifier EVM for use. Using the TPA005D12 class-D EVM with the TI plug-n-play audio amplifier evaluation platform is a quick and easy way to connect power, signal and control inputs, and signal outputs to the EVM using standard connectors. However, the audio amplifier evaluation module can be used stand-alone by making connections directly to the module pins, and it can be wired directly into existing circuits or equipment.

The platform switch and jumper settings shown in Table 2±1 are typical for the TPA005D12 class-D EVM. There are no jumpers or switches to set on the TPA005D12 class-D EVM board, itself.

Table 2±1. Typical TI Plug-N-Play Platform Jumper and Switch Settings for the TPA005D12 Class-D EVM

POWER TYPE (Note 2)	JP4	JP5	JP6	JP7	JP8	S1	S2 (Note3)	S3
VDD (J6)	X	ON	Mute	X	Lo	X	OFF	U5

Notes: 1) ON = Jumper installed, OFF = Jumper NOT Installed, X = Don't care

2)Unregulated and battery sources must have a voltage regulator EVM (SLVP097) installed in platform socket U6 (see table 3±4, Section 3.5.5 for these options).

3)Set to ON when tone control board SLOP109 is installed in U1.

Topic		Page
2.1	Precautions	. . 2±2
2.2	Quick Start List for Platform	. . 2±3
2.3	Quick Start List for Stand-Alone	. . 2±5

2-1