Using The TPA0202 EVM With the Plug-N-Play Evaluation Platform

3.3 Using The TPA0202 EVM With the Plug-N-Play Evaluation Platform

The TPA0202 Audio Amplifier Evaluation Module was designed to be used with the TI Plug-N-Play Audio Amplifier Evaluation Platform. It simply plugs into socket U2.

The following paragraphs provide additional details for using the TPA0202 EVM with the platform.

3.3.1Installing and Removing EVM Boards

TI Plug-N-Play evaluation modules use single-in-line header pins installed on the underside of the module circuit board to plug into sockets on the platform. The EVM pins and the platform sockets are keyed such that only the correct type of EVM can be installed in a particular socket, and then only with the proper orientation.

Evaluation modules are easily removed from the platform by simply prying them up and lifting them out of their sockets. Care must be taken, however, to prevent bending the pins.

3.3.1.1EVM Insertion

1)Remove all power from the evaluation platform.

2)Locate socket U2 on the platform.

3)Orient the module correctly.

4)Carefully align the pins of the module with the socket pin receptacles.

5)Gently press the module into place.

6)Check to be sure that all pins are seated properly and that none are bent over.

3.3.1.2EVM Removal

1)Remove all power from the evaluation platform.

2)Using an appropriate tool as a lever, gently pry up one side of the module a small amount.

3)Change to the opposite side of the module and use the tool to pry that side up a small amount.

4)Alternate between sides, prying the module up a little more each time to avoid bending the pins, until it comes loose from the socket.

5)Lift the EVM off of the platform.

Details 3-7

Page 23
Image 23
Texas Instruments TPA0202 manual Installing and Removing EVM Boards, EVM Insertion, EVM Removal

TPA0202 specifications

The Texas Instruments TPA0202 is a high-performance Class-D audio amplifier designed for a variety of portable audio applications. Renowned for its efficiency and sound quality, the TPA0202 is an ideal choice for battery-operated devices such as mobile phones, tablet computers, and other handheld devices. With the continuous push for better audio experiences in compact formats, the TPA0202 stands out with its impressive specifications and features.

One of the key characteristics of the TPA0202 is its power efficiency. Operating at a high efficiency rate of up to 90%, this Class-D amplifier minimizes heat generation, allowing it to deliver more power to the audio output while extending battery life. This efficiency is especially crucial for portable devices, where battery performance is a key consideration.

The TPA0202 supports an output power of 2 watts per channel into 4 ohms, making it capable of driving small speakers or headphones with excellent sound quality. The device features a built-in differential input stage that enhances noise immunity, thereby ensuring cleaner audio reproduction. It also supports a wide supply voltage range from 3V to 5.5V, contributing to its versatility in different applications.

In terms of audio quality, the TPA0202 boasts low total harmonic distortion (THD) and exceptional linearity, resulting in rich, clear audio output. Additionally, it comes equipped with selectable gain settings, allowing designers to tailor the amplifier to various output requirements and system designs.

The amplifier also integrates various protection features, including thermal shutdown, short-circuit protection, and undervoltage detection, ensuring robust operation under different conditions. The TPA0202 is also simple to implement in designs, with a minimal external component requirement, further enhancing its appeal to engineers seeking quick and efficient solutions for audio amplification needs.

Moreover, the compact package size of the TPA0202 allows for easy integration into space-constrained designs. With its combination of high efficiency, excellent audio quality, and protective features, the Texas Instruments TPA0202 continues to be a compelling choice for developers looking to enhance audio performance in portable and battery-operated devices. Whether for consumer electronics or in more specialized applications, the TPA0202 delivers reliable and impressive sound amplification, making it a go-to component for modern audio solutions.