Texas Instruments TPA6110A2 MSOP manual Features, Introduction

Features

1.1 Features

The TI TPA6110A2 MSOP audio amplifier evaluation module and the TI plug-n-play audio amplifier evaluation platform include the following features:

-TPA6110A2 MSOP Stereo Audio Power Amplifier Evaluation Module

J Dual channel, single-ended operation

J 150-mW output power into 8 Ω at 5 V

J2.5-V to 5.5-V operation

JVery low distortion:

H THD+N is less than 0.01% at 1 kHz and less than 0.03% from 20 Hz to 20 kHz into 10-kΩloads

H Less than 0.02% at 1 kHz and less than 0.4% from 20 Hz to 20 kHz into 32-Ωloads

H Less than 0.05% at 1 kHz and less than 0.8% from 20 Hz to 20 kHz into 8-Ωloads

JExtremely low current consumption in shutdown mode

JInternal thermal and short-circuit protection

JInternal pop reduction circuitry

-Quick and Easy Configuration With the TI Plug-N-Play Audio Amplifier Evaluation Platform

JEvaluation module is designed to simply plug into the platform, automatically making all signal, control, and power connections

JPlatform provides flexible power options

JJumpers on the platform select power and module control options

JSwitches on the platform route signals

JPlatform provides quick and easy audio input and output connections

-Platform Power Options

JOnboard 9-V battery

JExternal 5-V±15-V (VCC) supply inputs

JExternal regulated VDD supply input

JSocket for on-board 5-V VDD voltage regulator EVM

JOnboard overvoltage and reverse polarity power protection

-Platform Audio Input and Output Connections

JLeft and right RCA phono jack inputs

JMiniature stereo phone jack input

JLeft and right RCA phono jack outputs

JLeft and right compression speaker terminal outputs

JMiniature stereo headphone jack output

1-2 Introduction