Chapter 2
Operation
Follow the steps in this chapter to quickly prepare the TPA6110A2 MSOP audio amplifier EVM for use. The TPA6110A2 MSOP EVM and the TI
The platform switch and jumper settings shown in Table 2±1 are typical for the TPA6110A2 MSOP EVM and will cause the TPA6110A2 IC to shutdown/mute when a plug is removed from platform headphone jack J10.
Table 2±1. Typical TI
EVM | JP6 | JP7 | JP8 | S2 | S3 |
TPA6110A2 | X | Lo | X | See Note 2 | U5 |
Notes: 1) X = Don't care
2)Set S2 to ON when signal conditioning board is installed in U1; set S2 to OFF when no signal conditioning board is installed.
Topic |
| Page |
|
|
|
2.1 | Precautions | . . 2±2 |
2.2 | Quick Start List for Platform | . . 2±3 |
2.3 | Quick Start List for | . . 2±4 |
2.4 | References | . . 2±5 |
|
|
|