Press select a ninth time (Note: the single dot remains at the bottom, separating the hour and minute); the lunar/tide clock will display the minutes of the cycle. Press the maximum or minimum buttons to set the minutes of the cycle.
Report | - |
Hold | |
| AM |
Press select a tenth time (Note: the single dot is now located at the top, between the hour and minute); the peak of the cycle hour (usually high tide) will be displayed. Change as desired.
Report
Hold 09 ' - - | AM |
PM |
Press select an eleventh time (Note: the single dot remains at the top between the hour and minute), and the minutes of the peak hour will be displayed. Change as desired.
Report
Hold - - ' 3 1 | AM |
PM |
Press select a twelfth time and the unit will return to normal display mode.
Calibration mode
See the calibration reference section for other details.
Calibration Method
Press select and scale at the same time, and the unit enters calibration mode. The unit first displays the Solar radiation calibration factor. If necessary, press the maximum or minimum key to enter the proper factor. This factor is located on the back of the instrument. When the unit is in protect mode, this function is disabled.
Texas Weather Instruments, Inc. | 8 | WRL Instruction Manual |
