The Singing Machine SMB-664 instruction manual Disco Light Operation, Mode

DISCO LIGHT OPERATION

￿Select the LIGHT switch to MUSIC position, the light bulbs will be flashing according to the output sound level.

￿To turn off Disco Light function, select the LIGHT switch to OFF position.

￿Select the LIGHT switch to PATTERN position, then press LIGHT PATTERN MODE button repeatedly to enjoy the 8 kinds of light flashing effects as per the below table.

L1 (Orange)

L2 (Yellow)

L3 (Red)

L4 (Green)

ENGLISH

Mode 1

Combination Mode - Under this mode, the six pattern modes of Mode 2 to Mode 7 will take place in order alternatively.

Mode 2

Back and forth wavy gleam - There will be fast and slow gleaming. Fast, slow, fast gleaming… will take place alternatively. Under each cycle, the direction of gleaming will change from forth to back at certain intervals.

Mode 3

Gleaming round the loop - The bulb glows in the order L1L2->L2L3->L3L4->L4L1- >L1L2…, there will be four states taking place at certain intervals in order.

Mode 4

Single light bulb will glow and dim, and the sequence is L1->L2->L3->L4->L1…, when one bulb dims, the one at its back will glow. The back one will glow to its brightest when the preceding one completely dims off. There are 3 speeds for dimming, and will take place at certain intervals alternatively.

Mode 5

Gleaming round the loop forward and backward, gleaming and dimming. There will be gleaming round the loop forward (L1L2->L2L3->L3L4->L4L1- >L1L2…) glittering gleaming round the loop backward. (L4L3->L3L2->L2L1->L1L4- >L4L3…) glittering gleaming round the loop forward… taking place alternatively.

Mode 6

Four bulbs gleam and dim together. There are three speeds of gleaming and dimming, taking place alternatively at certain intervals.

Mode 7

Glittering and gleaming round the loop at the same time. (L1L2->L2L3->L3L4- >L4L1->L1L2…)

Mode 8

All the light bulbs remain gleamed.

E12