CD OR CD+G OPERATION

￿Warning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist the urge to swing the microphone around by the cord!

PREPARATION

￿This unit is designed to play CD’s bearing the identification logo " ". If CD’s do not conform to the CD standard, they may not play properly.

￿Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion from the center of the disc to the outside edge.

￿Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean compact discs. These chemicals will permanently damage the plastic surface of the disc.

￿Always place the compact disc on the disc tray with the label facing upward. Compact discs can be played on only one side.

￿To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

￿Discs should be returned to their cases after use to protect them from dust and scratches.

￿To prevent warping the disc, do not expose it to direct sunlight, high humidity or high temperatures for extended periods of time.

￿Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips pens may damage the surfaces of the disc.

PLAYING CD OR CD+G DISC

￿Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level.

￿Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and vocals through your sound system.

￿Do not press the disc cover of the CD compartment while it’s playing.

￿Never place anything except a compact disc on the disc tray. Foreign objects can damage the unit.

￿Do not apply excessive force to disc cover.

￿Only place one disc on the disc tray at a time.

TURNING POWER ON/OFF

￿To turn on the Karaoke center, press the ON/OFF button, the ON/OFF LED Indicator will light up.

￿To turn off the system, press the ON/OFF button again, the ON/OFF LED Indicator will turn off.

FUNCITON SELECT

Set the FUNCTION SELECT switch to CDG.

LOADING A DISC

￿Lift up the CD door to open the CD/CDG compartment. Place a disc in the compartment with the printing side facing upward and the shiny side facing down.

￿Gently close the CD door to the CD/CDG compartment. The LED window will display total number of track. (If no disc is loaded, it will display “ ”.)

(Refer to the Trouble Shooting Guide on page E14 if a disc is loaded but the total tracks do not appear.)

ENGLISH

E10

Page 11
Image 11
The Singing Machine SMB-664 instruction manual CD or CD+G Operation