Therma-Stor Products Group 300 owner manual The Phoenix High Capacity Dehumidifier

Phoenix 300 High Capacity Dehumidifier

Part number TS-218

PO Box 8680 • Madison, WI 53708

Owner’s Manual — Phoenix 300

Installation, Operation and Service Instructions

Read and Save These Instructions

The Phoenix 300 Dehumidifier is designed to maximize the water removal capacity from a single 110V, 15 amp circuit.

The multiple ducting options on the Phoenix 300 allows for ducting both the intake air and the filtered and dehumidified supply air. This makes it possible to easily combine the Phoenix 300 with a HEPA air scrubber, air conditioner or desiccant dehumidifier.

Phoenix dehumidifiers feature significant air filtration. Even the standard 57% MERV-8 filters remove over 90% of seven-micron particles (the size of a human red blood cell). This filtration dramatically improves the air quality in the areas being dried and assures continued optimal performance of the refrigeration system.

The Phoenix 300

High Capacity Dehumidifier

High capacity – Up to 38 gallons per day

High energy efficiency – Plugs into a grounded 115V outlet

Pleated media filter – Built-in air filter reduces dust and mold

Twist-on duct collar – Direct the drying power where you need it

Optional high-efficiency filter – Removes 95% of one-micron particles

Reservoir pump system – Strong and dependable, 20 ft of lift

Pump purge switch – Drains reservoir, no spills or drips

Pump fail warning light and cut-off – Prevents reservoir overflow

Lighted power switch – Check machine status at a glance

Digital hour meter – Easy-to-read for more accurate billing

30-ft power cord – No need for extension cords

30-ft drain hose – Pump condensate to sinks or drains

Specifications subject to change without notice.

Phoenix 300

PN 4022599

Revised 1/07

Toll-Free 1-800-533-7533  www.thermastor.com • sales@thermastor.com