REPLACING THE BULBS
1.Switch off the extractor hood and pull out the mains plug or switch off the electricity supply at the fuse box.
When switched on, the halogen bulbs become very hot. Even for some time after the bulbs have been switched off there is still a risk of burns.
2.Remove the bulb ring with a screwdriver or similar tool.
3.Replace the halogen light bulb (conventional halogen bulb, 12 Volt, max. 20 Watt, G4 bulbholder). Caution:
Take hold of the bulb with a clean cloth.
4.
5.Restore the power by inserting the mains plug or switching on the fuse.
Note: If the light does not function, check that the bulbs have been inserted correctly.
PAGE 9
