REFRIGERATION 42-INCH SIDE-BY-SIDEREFRIGERATOR

REFRIGERATION 42-INCH SIDE-BY-SIDE REFRIGERATOR

Models: KBUIT4255E, KBUIT4265E, KBUIT4275E, KBUDT4255E, KBUDT4265E, KBUDT4275E

Stainless steel side-by-side	Stainless steel side-by-side
with internal ice maker.	with full-filtered external
	ice and water dispenser.
KBUIT4255E	KBUDT4255E
Masterpiece® handles	Masterpiece® handles
KBUIT4265E	KBUDT4265E
Professional Series Handles	Professional Series Handles

SPECIFICATIONS

	Total Capacity (cu. ft.)	25.2
	Refrigerator Capacity (cu. ft.)	16
	Freezer Capacity (cu. ft.)	9.2 (KBUDT)
	Freezer Capacity (cu. ft.)	9.3 (KBUIT)
		9.3 (KBUIT)
	Product Width	41"
	Product Height	83 1/8"
	Product Depth	25"
	Cutout Width	41 1/2" – 41 3/4"
	Cutout Height (Min–Max)	83 1/2" – 84 3/8"
	Cutout Depth	24"
	Energy Consumption	611.01 kWh w/Dispenser
		561.01 kWh w/o Dispenser
	Electrical Supply	115V / 60Hz / 6.9 Amp
	Power Cord Included	120V-3 prong
	Shipping Weight (lbs.)	573 – 613

Custom panel side-by-side	Custom panel side-by-side
with internal ice maker.	with full-filtered external
	ice and water dispenser.
KBUIT4275E	KBUDT4275E
Masterpiece® and	Masterpiece® and
Professional Series Handles	Professional Series Handles
can be ordered separately.	can be ordered separately.

INSTALLATION OPTIONS

Specifications in the planning pages provide dimensions and installation detail for the stainless steel models as well as installation detail for the custom panel series.

CUSTOM PANELS

The custom panel series features factory-installed, traditional style trim to provide a “framed” look. This series requires the installation of custom panels that are not included. You will need to create the panels yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings on pages 264-271 for panel specifications.

On the custom panel series, you can create a “frameless” look using full-overlay custom panels. You will need to order a Trimless Trim Kit (TRIMKITSXS). This accessory kit contains parts to replace the factory trim. Full-overlay custom panels and handles are required but not included in the accessory kit. Create the panels according to the specifications in the “Full-Overlay Custom Panels” section. You can order a set of Thermador’s handles or select handles from another source. For door clearances, see “Handle and Door Clearances for Custom Panel Series.”

SIDE PANELS

Custom side panels may be needed when not enough space is available to have cabinets on both sides of the refrigerator or when the refrigerator is placed at the end of a cabinet run. For the stainless steel models, you may choose an Inset, Flush, or Recessed Inset panel installation. For the custom panel series, you may choose an Inset or Recessed Inset panel installation.

All refrigerators are UL and CUL approved.

272