CLEANING
INSTRUCTIONS
Be sure lights are cool before cleaning the hood.
To Clean Filter/s
•It is recommended that the filters be washed at least once a month; they can be washed by hand or in the dishwasher.
•Drain water through holes and along filter edges and allow to dry thoroughly before replacing it.
To Clean Hood Surface
•For general care, wipe the outside of the stainless steel, white, black or glass hood with sudsy water or household cleaners such as Fantastic® or Formula 409®, rinse well and dry with clean soft cloth to avoid water marks.
•Wipe and dry brushed stainless steel in the same direction as the grain.
•Do not use abrasive products.
•To remove finger prints and give added shine use spray cleaners such as Stainless Steel Magic® and Shimmer®
FILTERS
The metal grease filters are made of anodized aluminum and are long lasting.
To Remove The Metal Grease Filter/s
•Turn blower and lights off.
For Models HNI, HTNI
•Push each handle in the direction of the arrows as shown in Fig. 2.
To Replace The Metal Grease Filter/s
• Reverse procedure.
Fig. 2 |
Page 5
