1)Attach (2) control knobs and (1) rotary ignition knob by aligning holes with control panel as
7 shown.
2)Remove (4) clear protectors from shelf supports.
Clear Protectors
Control Knob
Qty: 2
Rotary Ignitor Knob | Control Knob | Control Knob |
Qty: 1 | ||
| Control Knob | Rotary Ignitor |
| Knob |
8
Rotary Ignitor
Control Knob Knob
1) Open grill lid, unfold side shelves.
2) Remove (2) cooking grates from grill.
3) Install (2) vaporizer bars by inserting round end of vaporizer bar inside front hole of grill. Rest rear end of vaporizer bar over support rib on back side of grill.
4) Replace cooking grates.
Note: Maximum shelf load should not exceed 10 lbs.
Cooking Grates
Vaporizer
Bar
Front of Grill
Right Side
Shelf
Left Side
Shelf
Back side of Grill
