9 | 1) | Close grill lid. |
2) | Insert hose regulator support wires into holes provided in end of left | |
| 3) | Remove yellow cap from gas inlet located bottom rear side of grill. |
| 4) | Bring hose connector to the rear of grill. |
| 5) | Pull back outer ring of hose connector and push connector onto back of gas inlet. |
|
| Release outer ring. Ring should connect and lock hose in place. |
NOTE: Perform leak test as described in Care & Use section before operation.
Remove
Yellow Cap
PullBack | Insert |
Hose Regulator
Support Wires
Hose
Gas Inlet
Left Side Shelf
Outer Ring
Note: If using a longer 1 pound cylinder make sure left side shelf hangs over tables edge.
14 • 06401314
