Assembly

1

-Position Heat Shield (G) as shown at right below and place into Bottom (H).

-Insert narrow end of Burner (F) through large hole in side of Bottom

(H) and rest burner bracket on Shield (G).

-Insert one 1/4-20 x 3/8” Screw (M) through Bottom (H), Shield (G) and into burner bracket.

CAUTION

Some parts may contain sharp edges! Wear protective

gloves if necessary.

BURNER (F)

HEAT RESISTANT SHIELD (G)

BOTTOM (H)

1/4-20 x 3/8” SCREW (M)

2

-Position Legs (K) as shown at right.

-Spread ends of Legs (K) slightly and insert into holes in front and rear of Bottom (H).

LEG (K)

9

Page 9
Image 9
Thermos 4611118 manual Assembly