Installing the Mouse with Macintosh OS X
Before You Begin
¾Determine that your Macintosh is
¾Ensure that the accompanying Bluetooth software (Stack) is installed.
¾It is not necessary to disable or remove your existing mouse software. (Refer to the User’s Guide included with your Macintosh with any questions on your current mouse.)
¾Insert the 2 AAA batteries (included) beneath the battery cover of the Stowaway Travel Mouse.
Creating a Paired Connection with your Macintosh
1.Install the Bluetooth Dongle, if necessary, and launch the accompanying Bluetooth Setup Assistant on your Macintosh.
2.Refer to the instructions included with the Bluetooth Setup Assistant on the process for Pairing Devices.
3.Power on the Stowaway Travel Mouse by switching the Power switch to ON and press the Discoverable button to make it detectable by the Bluetooth software on your Macintosh.
4.Begin device detection for the mouse with the Bluetooth Setup Assistant, and locate the Stowaway Travel Mouse among any found devices.
5.Select the Bluetooth mouse in the list of discovered devices to create a link to your Macintosh.
6.After the mouse is successfully linked with your Macintosh, the mouse pointer will immediately begin responding to movement and button presses, similar to your standard mouse. Refer to the User Guide for your Macintosh to modify mouse functionality within the Macintosh Operating System.
Stowaway Travel Mouse Owner’s Manual | Page 3 |